Sharing The Installation Points Of The Toilet

- Sep 19, 2019-

First, the receipt of the goods will be installed after the acceptance of the face: the toilet should be subjected to strict quality inspection before leaving the factory, such as testing the water, visual appearance, etc. The products that can be sold in the market are generally qualified, but remember, no matter how big The brand must also be inspected in front of the merchant to check whether there are obvious defects and bruises, and whether there is color difference in each part.

Second, check and adjust the ground level: After buying the toilet and sealing cushion of the same wall distance, you can start the installation.

Before the installation of the toilet, the sewage pipeline should be inspected thoroughly to see if there are any mud and sand, waste paper and other debris in the pipeline. At the same time, check whether the floor of the toilet installation is horizontal or not. If the ground is found to be uneven, the toilet should be installed. Level the ground.

Saw the drain so that the drain is as high as 2mm-5mm above the ground, if possible.

Third, after commissioning and installing the water tank fittings, check for leaks: first check the water pipe, and drain the water for 3-5 minutes to ensure the cleaning of the water pipe.

Then install the angle valve and connecting hose, then connect the hose to the installed water tank fitting inlet valve and connect the water source, check whether the inlet valve is in water and sealed properly, whether the drain valve installation position is flexible, whether there is jamming and seepage. Leakage, with or without leaking inlet valve filter.

Fourth, finally, test the sewage discharge effect: the method is to install the water tank accessories, fill the water, try the flushing of the toilet, if the water flow vortex is very urgent and rushes quickly, indicating that the water is smooth, and vice versa, to check whether There is a blockage.

wall hung toilet with tank